15 on a 10 scale for performance and vale. 60 grit rips through the job as it should. Honestly, I’d put this up against 3M. You might use a few more discs over the job, but not by much. A++++

We use this commercially for the price you can’t beat it

High quality hook and loop sanding dice. These fit my dewalt 8 hole orbital sander and are excellent. The grit is exactly as needed. They will last a long time.

Impressed at how well these hold up on hardwood

ok

Always reorder these

Can as shown

It works great

I’ve been using these every day lately because i’m sanding a few guitars I bought recently. They’re very consistent in terms of the grit.That is stated on the disk. You also get a lot for the money. They do get used up pretty fast.But i’m also sanding an awful lot of polyurethane. I think they’ll do a lot better once I get to bare wood, plus i’m not using the coarser grits below 240 because it’s just too much for the finish on a guitar with my orbital sander, which is quite powerful.

Alright, DIY warriors and weekend warriors, get ready to meet your new best friends: the 100PCS 5 Inch 8 Holes Sanding Discs. These aren’t just any sandpaper discs—they’re the Swiss Army knives of the sanding world, ready to tackle any project with finesse and grit!First off, let’s talk variety. This pack comes with an impressive range of grits from 40 all the way to 600. It’s like having a full toolbox of sanding options at your fingertips. Whether you’re smoothing out rough edges or giving a final polish to your masterpiece, there’s a disc for every stage of your project. It’s the ultimate “choose your own adventure” for sanding enthusiasts.The 8-hole design is a game-changer. These discs are engineered for maximum efficiency, allowing dust to escape and keeping your work surface clear. It’s like having a built-in cleaning crew working alongside you, ensuring that you can see and sand with precision. No more sneezing fits from dust clouds—just smooth, efficient sanding.These discs are 5 inches in diameter, making them perfect for a wide range of sanders. They fit like a dream, staying secure while you work your magic. It’s like having the perfect dance partner who never misses a step, ensuring your sanding is as smooth as your best moves on the dance floor.Durability? Check. These discs are made to last, so you can tackle project after project without worrying about them wearing out too soon. It’s like having a trusty sidekick who’s always ready for the next challenge, no matter how tough the job.From rough shaping with 40 grit to the silky-smooth finish of 600 grit, these sanding discs have got you covered. You can start with the heavy lifting and finish with the finesse, all with one versatile pack. It’s like having a superhero team for your DIY projects, each member with their own special power.So, if you’re ready to take your DIY game to the next level, the 100PCS 5 Inch 8 Holes Sanding Discs are here to save the day. With a grit for every need and a design that maximizes efficiency, these discs are the ultimate sidekicks for any sanding adventure. Get ready to sand, smooth, and shine like a pro—because with these discs, you’re unstoppable!

Works pretty good especially for the price, you’ll get no complaints from me using these

These sanding discs aren’t the highest quality out there, but for the price, they’re a solid value. They fit my orbital sander perfectly and work well on both plastics and wood. I’ve used them for a few quick projects around the house, and they’ve held up just fine. They’re not as effective on metal—tends to wear down a bit quicker—but that’s to be expected at this price point.Overall, they’re great to have on hand for light-duty work. If you’re looking for budget-friendly discs for quick jobs, you really can’t complain about the value here.

Fit very well with my sander. Value is great. A good variety of grits included.

Surprisingly durable. Work well with my multi-master tool.

Not a lot to say other that I found that these work quite well. Adhesion to the sanding disc is excellent and they do last a fair while. My only complaint is that on occasion, some of the higher/finer pads seem to load a little quickly. Still, at their retail price, it’s not a huge deal to just replace.

Perfect size. Great value, high quality. No complaints at all.

I have used Dewalt, Diablo (the worst), Avanti, and other brands and I can say with confidence these are superior. Their composition is better, more durable, don’t flex as much, and cut faster IF YOU LET THE TOOL DO ITS JOB. That was for the geniuses who burn up tools and tool bits because they’re impatient and want to look macho to other guys. I’m superintendent, see it every day lol.

The best discs I’ve ever used, and they wear evenly. I cut 20 old rusted bolts with brackets and I’m still on the first disc.

Works as it should.

theese 4.5 inch cutoff wheels are just as good as any i have used. they keep cutting all the way down to the arbor. they can handle your standard angle grinder rpms. they are packaged in a plastic case, like a cd storage case, sich is a convenient size for keeping in your drawer. They can be used to cut but also they manage to grind very quickly. I am impressed with how many cuts i can make, especially for how cheap they are. theese wheels are built to hold up to long cuts too. Would definitley buy again. only thing i dont like is the case they came in was broken.

Yes I’m a welder for Epi welding in Las Vegas Nevada, and these cut off wheels are absolutely amazing! For less than a dollar a piece they last long they cut great there’s not a lot of flex to them , amazing product!!!!

More durable than I had anticipated. Had to dismantle a swimming pool and these blades made short work of cutting down the sides. On a side note, it cut through a piece of 3/4 inch Italian marble that was over 60 years old. It took a while, but this was just a top for one of my toolboxes…and I was impressed for how well it held up. For serious marble installations, I would use something else… but would check to see if they make one for this application.

Cheap and you get a ton of them. Hold up great, no shredding apart or breaking easily. Had no problem cutting through 1/4″ pate

Worked great cutting metal studs for wall. Good price

Great disposable wet-dry sanding sponges. Ideal for finish sanding before primers, priced economically enough to not worry about throwing them away after couple of uses.

I’ve used these sanding an extra fancy grade walnut stock with a rollover (taller monte-carlo that rolls over the top about an inch) cheek piece. They’re perfect for all the curved section on rifle stocks. I’m ordering a dozen each of the ones I use the most: 120, 180, 240, and 320 grit. The 2 each of 12 different grits is an excellent starter pack to figure out which you need. Unlike some other sanding paper and blocks I’ve purchased; these actually list the grit size of each and ever one. It’s a good washable grinding surface, the backing foam is the perfect thickness for sanding curve areas. I’ve found a plastic bristle brush is very helpful to use clean the pads under a stream of water.

I chose to try these instead of the traditional paper backed sandpaper. Glad I did. These are great. Easy to use and last much longer without tearing. These can even be cleaned and reused if needed. Nice product.

They are a little small, but work nicely! 80 grit through 3000 grit. A couple of each. Wet or dry use!

These sanding pads are great.the size is good and very easily bendable to get into grooves. So far seems like they will last and the price was right. Will be buying again so I have a spare set.

Spongy and sandy, does it all!Ease of use and handy size, works well on cabinet door prep. Greatest value for money

Great sanding blocks with attached different grades sandpaper Very long lasting used with water. I d definitely recommend and will order more when I run out. Thanks

Love the kit but the grit labeling is not accurate. Is fine for woodworking and general usage. Not at all fit for automotive painting.

Every now and again I’ll come across a product here on amazon that people are raving about and it will just be a bunch of hype but in this case the hype is 100% genuine. The are hands down the best flap discs I have ever used even beating discs I paid 2x the money for. When I used these to remove 9 layers of paint from some metal parts to refinish them, I could not believe my eyes on how quickly this stripped it down to bare metal. I had to put in so little effort that I didn’t even drain a dinky 4Ah M18 Milwaukee battery doing all the pieces. I am extremely pleased with this product and sad that I hadn’t heard of this brand before.If you are looking for something that works well, is fast, fits well and is durable look no further this it’s the best you can get.

Great , consistent, quality stuff

Great discs. Do an awesome job of deleting any wanted surface blemishes and grinding down coupons for weld tests. Good price point for the quantity of pads too.

Work well for the money. Seem as good as what I get from my welding supply place. Nothing amazing but good for the price

I am using these disks for sharpening and polishing steel so they do wear a bit and about the same as any.

Fast service and good product

These are good disks. Great value

I will order again

Fast shipping

These are some good sanding disc the paper is durable great value for the money hard to find a 100 sheet roll at this price . Would recommend to anyone.

Better than the stuff from the store will buy again

This isn’t the quality of 3 M but it will work . You dont get the longevity out of this Chinese paper but it’s not $80 a roll

The best sticky back pad I’ve ever used in 40 years. Super sticky…if you have a cheap soft foam da pad, it may tear out a chunk. For everyday use, the adhesive is the best I’ve seen.

Seams good.

Not 3m but good enough to do the job

Great product …great price

It fit my dewalt sander perfectly and was easy to install. No issues.

Funny story. I had a dewalt orbital sander that I’d been using for years. Many, many sanding jobs, many hundreds of sheets of paper had been used. Over the years, the pad had been cracking, and I was aware that it was pulling off more and more as time went on.Enter a friend that needed to borrow it for a small project. Next I heard was a text and photo to the effect of “was the foam part supposed to come off”? Not sure if it was just it’s time, or if he was so clueless that he purposely pulled off the foam bit, but the pad was definitely separated. I said no worries, it was an old tool.Coincidentally, I inherited the exact same tool from my father during the time the original was on loan. This one was very close to new, but was having a similar problem with the foam separating. As I was changing paper, I pulled the foam straight off. Guess I was clueless too.Needless to say, I was very pleased to realize there are replacement parts for the pads. I now have two fully functional orbital sanders.These replacements are 90% as good as the originals. In my opinion, the holding power of the “hook” size of the velcro on this pad isn’t as good. I’ve had a couple situations where the paper came loose. Definitely not a deal breaker. Otherwise, the pad feels exactly like the original.

These things are worth getting and keep in stock. Ther seem to hold up better than the OEM ones.

Great price and seems much better than the plastic version that comes on the sander.Fits perfect and is easy to install.

I was able to get through one small panel of plywood at a single grit and the pad became unusable due to melting. I compared the old (very used) Dewalt replacement plate where the foam had come off next to this melted one that didn’t even last more than 20 minutes. Dewalt’s is also plastic but it held fine? Unbelievable.I didn’t see that there was a metal plate option because I only need a 1 to 1 replacement as I couldn’t find the official replacement pad at Home Depot. Now have to take time out of my day to find another pad because I can’t get through this project without a sander. How would I trust their other options??? Disappointed is an understatement.

The product was as expected. The shipping was horrible supposed to arrive Friday. And didn’t arrive until the next Wednesday. Why do I pay for prime if I get terrible shipping. Stop using usps.

It fits dewalt orbital sander with 4 screws perfectly.

Old one was so dilapidated. This seemed to be the perfect replacement and it was. Back in bed is to sand again!